上記の広告は1ヶ月以上更新のないブログに表示されています。
新しい記事を書く事で広告が消せます。
Now the Super Catalyzer II for R35 GT-R is available

R35_SUPERCATALYZERII_450s.jpg


Current legislation requires that all vehicles are fitted with a catalyzer
to reduce emissions and protect the environment.
Since the R35 stock catalyzer is authorized as a low emission one
even if it has the sport engine that the exhaust amount is 3.8L,
it naturally increases the exhaust resistance.

On the contrary, Mine’s Super Catalyzer II for R35 GT-R is totally compatible
with the sport engine’s performance and also completes the purification action

Suitable Model: R35 GT-R VR38DETT
Exhaust gas certificate included
Material: Stainless
Main Pipe diameter: φ70 x 2 → φ80
Unit Price: 218,000 yen
スポンサーサイト
20080419132349.jpg


This is fully designed for R35 GT-R with our confidence and pride.

It provides a stable and yet comfortable ride by considering
mainly the street use with the sufficient amount of stroke.

Furthermore, by using a tube isolator
the unpleasant spring sound of the standard suspension
is greatly reduced.

Variable rate spring
Tube isolator attached

Vehicle height (compared to the normal)
Front : -15~-20mm
Rear : -10~-15mm

Unit Price: 66,000 yen for a set

For inquiries about this product, please contact us.
Mine's R35 GT-R Rear wing was finally finished to produce.

The rear wing is fabricated from ultra-lightweight high quality dry carbon fibre twill weave.
By maintaining the stock design, and increasing the height by 30mm
the down force and high speed stability is improved.

R35_REARWINGs.jpg


In addition, the clear coat finish protects the carbon from ultraviolet radiation.

R35_REARWING3s.jpg


The design of the gurney creates the maximum amount of down force,
improving cornering performance and high-speed stability without increasing drag.

R35_REARWING4s.jpg


Installation is a simple bolt-on procedure.
Plus since this rear wing cannot incorporate the High Mount stop light,
it is for circuit use only.

Below is the image of stock rear wing just in case.

R35_REARWING5normals.jpg


Construction: Dry carbon twill weave

Unit Price: 380,000 yen

For inquries about this product, please contact us.

Please click on the below to see how our chief mechanic Nakayama
has created Mine's Stage II Engine which was recently distributed by
Kanzen Performance.
Please enjoy the science and technology of Mine's Engine.

http://www.kanzenperformance.com/Stage2Gallery.html

No287.jpg
Big Brake Rotor Kit

GT-R_BIGBRAKEROTORKIT_annais.jpg


We have developed the Big Brake Rotor Kit for use with the factory caliper.
24 slot front discs and 16 slot rear discs together with the replacement brackets
are included in the kit.
It has been developed to improve drivability and braking performance as well.

For Front Rotor diameter : φ400 24 slot
For Rear Rotor diameter : φ400 16 slot

For Front Unit price: 230,000 yen
For Rear Unit price: 245,000 yen

ESTA FULL SPEC SUSPENSION Ⅱ/ III

R35_ESTA_II_III_500s.jpg


Mine's have developed after all the precision suspension setup
based on SACHS shocks and utilizing Eibach springs.

The usual spec is based on the pillow upper mount. Rubber upper mount can be selected by consultation.
Spring Rate : 12k~ (Front/Rear)

Vehicle height (compared to normal) Front – 40mm /Rear –20mm

ESTA FULL SPEC SUSPENSION Ⅱ
The Full Spec II is designed for drivers that want a precision suspension setup for both street and circuit use. Based on SACHS shocks and utilizing Eibach springs, they are fully height adjustable with independent bump/rebound adjustment. The aluminum construction ensures they are ultra light weight. Please enjoy the science of Mine’s suspension.

Unit price: 952,000 yen

ESTA FULL SPEC SUSPENSION III
The Full Spec III is designed for drivers that want an uncompromised, precision suspension setup for circuit use.
The ultra lightweight, aluminum shocks are based on SACHS units and utilize Eibach springs. As well as being height adjustable with independent bump/rebound control, the bump/rebound can be changed for different speeds using the attenuation control, thereby offering 3-way adjustability.

Unit price: 1,200,000 yen

PAGID BRAKE PAD

PAGID_BRAKEPAD_500s.jpg


Mine's brake pads manufactured by Pagid, a world renown company
for their experience and quality, use a ceramic, asbestos free
compound and improve braking feel and performance.
It is recommended to use these pads with the Big Brake Rotor Kit.

First the ones for circuit use are now available!
Unit Price: Front 125,000 yen / Rear 53,500 yen

ROOF ANTENNA

20080330195808s.jpg


This Roof Antenna is installed in our demo car, R35 GT-R.
Its installation is easy with it's functionally and
stylish quality looks for the cars other than GT-Rs.

For inquiries about these products, please contact us.

 | BLOG TOP | 


上記広告は1ヶ月以上更新のないブログに表示されています。新しい記事を書くことで広告を消せます。