上記の広告は1ヶ月以上更新のないブログに表示されています。
新しい記事を書く事で広告が消せます。

Below is how to install the
Carbon Mirror Surround.

Please find it when you install this product
for your R35 GT-R.



CARBON MIRROR SURROUND (How to Install)
スポンサーサイト
Since the first Shakedown Test at Tsukuba circuit
on December 6th 2007, the Mine's R35 GT-R has
been constantly improving. The first test was in standard
trim, and achieved a lap time of 1.0301min.

Since then we have thought about ways to improve
the car, and have researched ad dveloped a number
of parts. A later trial at Fuji Speedway recorded
a time of 1.51258.

Among our current products is the Spec-X 6.0 Kit,
which is the state-of-the art kit to meet the
600ps at the maximum and to bring out the full
potential of this amazing GT-R.

The Spec-X 6.0 Kit comes with Super Outlet Pro II
cat-less outlet pipes, Straight converter cat-less pipes,
reinforced actuators with adjustable rods, an electronic
boost contoller (HKS EVC5), NGK racing plugs, reinforced
hose bands as well as a special newly tuned ECU
or Type-X VX-ROM.

20090212-FSW2s.jpg

And now last Thursday on February 12th,
with this Spec-X 6.0 Kit we tested our
R35 GT-R at Fuji.
Mr. Yamada drove it around Fuji Speedway,
and recorded the best lap time of 1.49782
with the air temperature at 10°C and
the humidity at 35%.

20090213-FSW_Laptimes.jpg

We will develop the R35 in the true spirit of Mine's.
We will continue to focus on enhancing the beauty
and gracefulness as well as the performance
of the car with our know-how and technology.
Please keep an eye on Mine's.
Mine's Carbon Mirror Surround is the codeveloped
product with Mine's and and Mooncraft and made of
high quality twill weave dry carbon with durability
as well as aesthetically and creative design.

GTR-MirrorSurroud-500s.jpg

GTR-MirrorSurroud2-500s.jpg

Installation is easy by simply surrounding with
the stock mirrors.
Mine's SILENCE-VX PRO TITAN II Muffler
for 370Z is now beautifully finished and released.

The structure of the pipe is as follows.

Pipe diameter: 80φ → 60φ x 2 
Exhaust diameter: 110φ x 2

Z34_SILENCEVXP_TiII-1-500s.jpg

Z34_SILENCEVXP_TiII-3-500s.jpg

And we used Stainless for the center pipe,
and Titanium for the rear ends in terms of
its construction.

Please call us or email us if you would like to order it.
Thank you very much.
We would like to announce our new products
for 370Z as shown below.

AIR SCOOP TYPE II

Construction: Dry Carbon Twill weave
Some modification is needed when installation.

CARBON FRONT SPOILER

Construction: Dry Carbon Twill weave
This is newly designed carbon front spoiler
and a beautifully finished one.

Z34-FRONTSPOILER_AIRSCOOP-IIs.jpg

CARBON REAR WING

Construction: Dry Carbon Twill weave
You need to have a factory rear spoiler to
install this carbon rear wing.

Z34-RrWINGs.jpg

For inquiries about the above products,
please contact us through email or phone.

Mine's Co., Ltd.

5-7-25, Hayashi, Yokosuka-City,
Kanagawa, Japan 238-0315

TEL : +81-46-857-3313
FAX : +81-46-857-2708
Email : mines@mines-wave.com
URL : www.mines-wave.com

Here, you can see the first Spec V GT-R in the world at Mine's.

GTR_SpecV3.jpg

GTR_SpecV_LOGO2.jpg

Our special customer patiently has been waiting for this
special car, Spec V GT-R.
This is indeed the first No.1 production
model Spec V GT-R.
He kindly dropped by our shop yesterday at around 4pm
while driving this super brand new GT-R, and
we including our another R35 GT-R customer were
overwhelmed and surprised by this elegance,
beauty and complexity

Our president, Niikura, is trying to check this Spec V GT-R's feeling
and drivability as shown below.

Niikura_SpecV1.jpg

We are planning to supply the Mine's products for this model too,
so please keep an eye on Mine's.

 | BLOG TOP | 


上記広告は1ヶ月以上更新のないブログに表示されています。新しい記事を書くことで広告を消せます。